磷酸鉄鋰電池

“LiFePO4”磷酸鉄鋰電池

安全性、長壽命、品質穩定可靠

T320 戶外儲能電源 大功率320W直播戶外應急便攜式電源

型號編碼:T320-EU
標稱電壓:12.8V
標稱容量:25Ah
出廠電壓:≤12.8V
執行標準:GB/T 18287-2013
工作溫度:0~45℃(充電),-20~55℃(放電)
產品規格:240 x 137 x201 ±0.5mm
產品重量:≈2400g
開發定制:ODM/OEM
產品描述:T320是由瑞鼎開發生產的一款戶外個人應急儲能電源,使用磷酸鐵鋰電芯確保電池使用時的安全性,中美歐規齊全,可給客戶提供OEM服務。

??在線下單
DC INPUT
Item Min Type Max Remark
Rated Input voltage 10V 15V 25V Whichever Non load or loading
Rated Input current - 3A 3.5A  
Rated Input power   45W   Automatic adjustment according input power
Ripple voltage of charging - - 200mV Test from the Input connector, oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor
Input over-current protection - - -  
Input Lower-voltage protection - - 5V  
Input over-voltage protection 25V - 27V The devices will stop charging If the Input voltage exceed the protection voltage
Input port short-circuit protection - - - Stop charging, components no damage
Input polarity reverse protection - - - Support(not charging if input polarity reverse)
Input adapter compatibility 10-15 VDC
Solar panel charging 18-24V with mppt function
Pass through function The device can support discharging while the product is charging; the Type-C Output power will drop down to 36W if the product charging via DC Input port.
LCD display of charging Display the charging power and battery capacity
Battery charging suggestion
  1. Suggestion charging the device every 2 or 3 month;
  2. Self consumption: <2mA
 
PD-INPUT AND OUTPUT
Item Min Type Max Remark
PD45W
Charge and Discharge
4.75V 5.0V 5.5V
  1. PCBA board end voltage;
  2. 5V/9V/12V/15V      Rated       input/output current:3A
20V Rated input/output current:2.25A
8.55V 9V 9.45V
11.4V 12V 12.6V
14.25V 15V 15.75V
19V 20V 21V
Apple 5V/2.4A
Charge and Discharge
4.75V 5.0V 5.25V Protocol: BC1.2 DCP; Apple 2.4A
    2.4A
Output short circuit protection       Turn off discharging
Output features:DC 口(5521)Output features
  Min Type Max Remark
Output voltage range 10.8V 12.0V 14.6V  
Allowable output current - 10A -  
Allowable output power - 120W 146W  
output current - 10A 12A CV 12V test
Output ripple - - < 150mV Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, the ripple < 800mV while AC Output loading
Discharging efficiency >92% - - Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Limited current protection 10A - 13A The output will turn off if the output current is exceed specified value; the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
Output over-voltage protection 15V - 16.8V The output will turn off when the product
doesn't   work   properly   and   the    output
voltage is exceed specified value.  
Short circuit protection - support - The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
             
USB1&2 Output features
Item Min Type Max Remark  
Output voltage range 4.75V 5V 5.25V    
Allowable output current - 2.4A -    
Allowable output power   12W      
CC Output 2.1 2.4 2.5A CV 4.75V Test model  
Output ripple - - < 150mV Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor,  
Discharging efficiency >92% - - Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.  
Limited current protection 2.5A   3A The output will turn off if the output current is exceed specified value;  
Output over-voltage protection 6.2V - 6.8V The output will turn off when the product doesn't  
  work properly and the output voltage is exceed  
specified value.    
Short circuit protection - suppor
t
- The output will turn off if the output port is short circuit by wire or external devices; the product will be automatically recovery work normally  
        after cutoff the loading.
                 
Item Min Type Max Remark
AC Sine wave output features:
Item Min Type Max Remark
Output voltage range 200V 220V 240V  
Rated output current - 0.9A -  
Rated output Power   200W    
Output frequency 47 Hz 50 Hz 53Hz  
Non-loading current     600mA  
Discharging efficiency >85% - - Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Over loading protection 220W - 300W The output will turn off if the output power is exceed specified value;
the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
Over temperature protection Of AC board 80℃ - 100℃ Tthe output will turn off, the product can be recovery work normally after temperature down and press the key button
Over temperature recovery
Of AC board
70℃ - 80℃
Fan start 55℃   65℃  
Fan stop 45℃   55℃  
Short circuit protection - suppor
t
- The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
Remark: the fan will stop runing if the the AC board was temperature protection.

Automatic power off parameter:
Item   Min Type Max Remark
USB1 turn-off current -   80 mA 100 mA  
USB2 turn-off current -   80 mA 100 mA  
DC turn-off current -   50mA 80 mA  
AC turn-off power -   3W 4W  
TYPE-C turn-off current     50mA 80mA  
LED light turn-on -   - - The automatic will be not available while LED light is turn on.
Remark:
  1. Above parameter value only specified for each one port, the connect more than one port, the turn-off current will count all the port of current.
  2. The default setting is turn-on the automatic power off function,the user can press the DC + AC key button for 3S, the buzzer short ringing 2 times, the automatic power off function will be turn-off; press the DC + AC key button for 3S again, the buzzer long ringing 1 time,the automatic power off function will be recovery work normally;
  3. The automatic power off function also be recovery work normally after re turn-on the product After turn off the product ≥10S.
3.5 LED light function:
LED Current - 150mA 250 mA  
LED Voltage - 18V 21V  
LED Power - 3.6W 5.25W  
Lamp color temp. - 4500K -  
Lamp qty.   12    
Battery features:
No. content Testing method Remark
1 Charge cut-off voltage 13.8V  
2 Discharge cut-off voltage 8.8V  
3 Standard charge Under the condition of the ambient temperature of 25±2℃,
Charge the battery at constant current of 0.2C to reach 13.8V. Then charge the battery at constant 13.8V voltage until the charging current decreasing to 0.02C.
 
4 Standard discharge After the standard charging,rest for 1 hour then discharge to 8.8V@0.2C.  
5 Shipments voltage   Quantity of electricity≤30 %
6 Maximum Charge
Current
≤12A  
7 Maximum
continuous working current
≤30A Instantaneous current≤ 60A time≤2S
8 Rated capacity Typical capacity:250000mAh
Minimum capacity:24600mAh-5%
standard
discharge after standard charge
9 Operation temperature range charge:0~40℃ humidity:60±25% 60±25%R.H
discharge:-10~40℃
10 Storage temperature ≤1 month: -20 ~ 45℃ 60±25%R.H
Best 10~25℃ for
    ≤3 months: -10 ~ 30℃ long-time storage
≤1 year:    0 ~ 30℃
11 Impedance <80mΩ  
12 Weight Approx:≈2400g  
Environment features:
LCD Function Over temperature warning, display the AC ! and buzzer ringing 3 times when temperature protection action
Display current total charging power, discharging power.
The key button’s LED blinking during abnormal of AC i protection action
LED function key button with LED
Discharge compatibility The specified devices can be quick charge available.
Working temperature Charging:        0-40 °C
Discharging: -10-40 °C
Storage temperature -20 ~ 45℃
Working Humidity 20-90%RH
Storage Humidity 10-95%RH


在線詢價

用手機掃描二維碼關閉
二維碼
久久一本精品99....